Call Now : 021-2984-1193, 0812-1312-5950

Cord retention tester

Aplikasi:
Menguji kekuatan retensi kabel terhadap daya tarikan/beban mekanis & untuk memeriksa efektivitas retensi kabel dari kabel senur.
Ketegangan kabel dikendalikan dengan menggantung bobot dan dapat disesuaikan dengan penambahan 10N sesuai dengan massa atau arus dari sampel yang diuji. Mesin akan otomatis berhenti ketika jumlah dari tarikan selesai.

Spesifikasi:
Model: CPL-F20.A
Sumber daya: AC220 V, 50Hz
Dimensi (mm): 550 x 700 x 350
Jumlah test tarikan: 1~9999( Bisa diatur, Defaulnya 100 Tarikan)
Rate Pengujian: 60 times/min
Beban : 10N(1 Pcs), 60N(1 Pcs), 20N (2 pcs)
Sesuai standar: SNI IEC 60884-1 gambar 20,SNI 04-3892.1, IEC 61010, EN 61010,VDE0620


For testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage . The cord anchorage is used in the normal way, clamping screws, if any, being tightened with a torque equal to two-thirds of that specified in standard. After reassembly of the specimen, the component parts shall fit snugly and it shall not be possible to push the flexible cable into the specimen to any appreciable extent. The specimen is placed in the test apparatus so that the axis of the flexible cable is vertical where it enters the specimen. - The flexible cable is then subjected 100 times to a pull of - f 50 N if the rated current is 2,5 A, - 60 N if the rated current is above 2,5 A, but not more than 16 A and the rated voltage is up to and including 250 V, - 80 N if the rated current is above 2,5 A, but not more than 16 A and the rated voltage is above 250 V, - 100 N if the rated current greater than 16 A.

Power Supply : 220V  50Hz
Dimension (mm) : 540 x 240 x 860
Application: for testing cord retention is for check the effectiveness of  the retention of the cable of the  cord anchorage
Subject : Flexible Cable
Rate of Testing : 60 times/min
Counter Display : 6 Digit
Mass : 10N=1pcs,60N=1pcs,20N=2pcs (5,6,8,10 Kg)
Pull Speed/length of Pull : 1 pull for 1 second
Number of pull : 100 times to Pull
Conforms to standard : SNI IEC 60884-1 Figure 20
Sales & Online Support:
Local Phone/Fax: 021-2984-1193, GSM Celluler: 0812-1312-5950 / 0899-0070-146
http://www.alatuji-sni.com, info@alatuji-sni.com
Share this Product :
 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. Alat Uji SNI Lokal - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger